No menu items!

    Antec unveils DP505 White case in white color scheme and original mesh front panel

    On the front panel, you can see a stylized letter X. Three 120mm A-RGB fans are standardly installed behind the mesh, which shine through it. But they can be replaced with three 140mm or two 185mm front fans. Under the cover there is enough space for three 120mm or two 140mm fans. One 120mm fan is mounted on the rear panel. Finally, two more 120mm fans can be installed on the partition of the PSU segment.

    In the case of water cooling, the Midi Tower supports a 360mm front CBO radiator and a 120mm rear heat exchanger. With dimensions of 220 x 490 x 481 mm (W x H x D), the Antec DP505 White can accommodate motherboards up to E-ATX format. The maximum height of the CPU cooler is declared at 17 cm, the length of the video card is up to 37.5 cm. The length of the power supply is declared up to 20.5 cm. The case has two combo trays for 2.5/3.5″ drives and two “mounts.

    The I/O panel has two USB 3.0 ports, one USB Type-C, and one headphone and microphone jack each. On the front you can see the power button and the LED control button. There are dust filters on the lid and bottom of the case. Antec does not mention the presence of a frontal dust filter, most likely you will have to be content with a mesh. According to Antec, there is 23mm of space left behind the motherboard tray for cable routing.

    Antec DP505 White has only appeared in Europe so far, priced at around €100.

    As seen on PlayGround

    Latest articles

    Mortal Kombat 1 review

    Dune: Spice Wars review

    The Crew Motorfest review

    Lies of P review